Power Steering Belt: Removal? Are two belts better than one?

[Dan]

Hi Tim,

Thanks four sounding in on this. I think we have the same setup, two
belts blocking the removal path of the PS belt. I found some BB
documetation indicating one belt was standard.

Thanks for the adjusting comments. But, unfortuately my PS belt has
no molding definition left - i.e. there are no edges remaining -
everything is rounded, so I think it needs replacing.

Question: When your coach is not rolling, can you turn the wheel
with normal effort and no noise?

Thanks,

Danny
FC33 1978
San Jose, CA


--- In WanderlodgeForum@yahoogroups.com, "Tim Hannink"
wrote:
>
> My '81 has only one power steering belt - it goes around the crank
> and pump pulleys only. It is behind at least two other belts on
the
> crank pulley, both need to be removed in order to get it off. In
> order to get to them, you need to get behind the radiator. I have
> tightened my power steering belt without opening up the rad
though,
> its not easy but was definately quicker than swinging the radiator.
>
> Good luck,
>
> Tim Hannink
> Winter Park, FL
> 1981 FC-33SB