Koni Adjustable Shock Won't Adjust...'84 FC

[dthollis1961]

David,

Can't do that as both ends have holes to mount on studs on the
chassis. I might add that these shocks are stamped "Koni-Holland"
and have the Blue Bird logo on them, so I'm supposing that they are
the correct shock for the application.

David Hollis 84 FC35 (Not 33 as in original post) Springfield,IL


--- In WanderlodgeForum@yahoogroups.com, David Brady
wrote:
>
> David,
>
> You might want to check the compressed height of the
> shock and compare that to the length between the chassis
> shock mounts when the chassis air is dumped. The Koni
> adjusting nut may have been damaged due to the shock
> bottoming before the suspension bottoms. If so, you may
> be able to pick up a few tenths of additional shock
> travel by lining up the Koni adjustment nut with the foot
> valve assembly after they are installed on the chassis.
> Note, this only works when at least one end of the
> shock is a stud mount.
>
> David Brady
> '02 LXi, Smokey
> Va
>
>
>
>