HWH leveling jacks

[iwander_85pt40]

Thanks Greg for another option.

My dispatcher keeps me looping the Bay Area and Oxnard, so I don't get
down south too much.

I'll check with "O Rings and Things" and find out what their business
days are. If they are open on Saturdays, I could drive down.

We'll see you and Tim at the rally. It will be fun.

Phil



--- In WanderlodgeForum@yahoogroups.com, "Gregory OConnor"
wrote:
>
> Phil, Pull it off and drop it at 'O rings and Things' (800) 244-4614
> in Fontana across from the California SpeedWay.( If you get out this
> way on Business) If you split the ram they will check the cylinder
> walls to advise if a repair vs $250.00 replace is necessary while you
> are in the shop. You may want to bring along the HWH fatory phone
> number in the event Oring needs info. Some times the rod gets a scar or
> the cylinder walls get buggered up by water or gunk and blows the seal
> or the seal just gets old with low use.If it is an old issue there may
> be more leaking to follow and a local repair shop to do the seal
> replace without shipping may be the way to go. I have a Tilt ram on a
> tractor with factory rebuild of $445.00, ORings repacked the ram for
> $72.00
>
> Tim and I look forward to the next Rally you have planned. It will be
> good to see Christina again. We have our reservations
>
> Gregory O'Connor
> 94ptRomolandCa
> --- In WanderlodgeForum@yahoogroups.com, "iwander_85pt40"
> wrote:
> >
> > Hi all,
> >
> > I have an oil leak out the bottom of one of my front kick down jacks.
> > I'm assuming the 'o' ring is bad (most likely old age), and needs to
> be
> > replaced.
> >
> > Has anybody been involved with this type of repair? Based on your
> > experience, would you recommend rebuilding the jack or replacing it
> > with another unit?
> >
> > Phil Corpus
> > 'iWander'
> > 85PT40
> > Left Coast, Southern California
> >
>