Wanderlodge Gurus - The Member Funded Wanderlodge Forum / Discussions / HVAC v / Aquahot Antifreeze Leak

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Aquahot Antifreeze Leak
04-03-2013, 20:38 (This post was last modified: 04-03-2013 20:39 by davidbrady.)
Post: #4
davidbrady Offline
Grand Master Guru
*****
 		Posts: 2,025
Likes Given: 268
Likes Received: 212 in 161 posts
Joined: Feb 2013
Reputation: 17
RE: Aquahot Antifreeze Leak
Thanks guys, very much appreciated. I got in there and had a good look around. I think you're right John, it has to come out. The loop is pressed against the filler neck. To get a good solder connection a fair amount of conductive paste will need to be removed and the only way to do that is to remove the box from the bus. This will be my second time so it should be a little easier. So what's up with these early models? Why can't AH find a way to attach the filler necks reliably?
david brady,
'02 Wanderlodge LXi 'Smokey' (Sold),
'04 Prevost H3 Vantare 'SpongeBob'

"I don't like being wrong, but I really hate being right"
Find all posts by this user
Like Post Quote this message in a reply
Post Reply 


Messages In This Thread
Aquahot Antifreeze Leak - davidbrady - 04-03-2013, 09:40
RE: Aquahot Antifreeze Leak - pgchin - 04-03-2013, 10:49
RE: Aquahot Antifreeze Leak - davidbrady - 04-03-2013 20:38



User(s) browsing this thread: 1 Guest(s)

Contact Us | Wanderlodge Gurus - Free Classifieds & Support Forum Community Service | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication