Propane Pressure Regulator

[sfedeli3]

Hi Mike,

Good Rec- I replaced my old regulator with the Marshall Brass two-
stage unit and also the CCI leak detector this past spring. Both
work great. Marshall brass also has a "tee" connection that can be
installed for gas grills just after the 2-stage regulator. This
works great for connecting grills, etc.. to the main propane tank. I
believe that it came with a 12' hose that will connect to anything
that uses the small propane cannisters. You can also get an adapter
for larger grills. It's certainly safer than lugging around loose
canisters or a 20# propane tank.

Shane Fedeli
85PT40
Hershey, PA
--- In WanderlodgeForum@yahoogroups.com, "Mike Hohnstein"
<MHOHNSTEIN@...> wrote:
>
> Marshall Brass makes a two stage unit #294-00. This is for the
horizontal mount, the vertical mount is # 290-00. Complement this
new item with an CCI LP leak detector that shuts off the tank in
case of a leak. Part #7770.7, use control solenoid # 7718. Both my
birds have these controls and I sleep better knowing they are there.
> MH
> ----- Original Message -----
> From: Ron & Patty
> To: WanderlodgeForum@yahoogroups.com
> Sent: Tuesday, July 11, 2006 9:35 PM
> Subject: [WanderlodgeForum] Propane Pressure Regulator
>
>
> Now I do have a propane problem after all. When I had my propane
tank
> filled last night, it was apparently overfilled and blew the
pressure
> relieve valve on the tank's regulator (lost 3/4 of a tank). Does
know
> where we can find these old style regulators or a substitute?
>
> Ron, No. California
> 85PT36
>
>
>
>
>
> [Non-text portions of this message have been removed]
>