Help! need belt specs for a Cat 3208 in a 90SP36

[pattypape]

Chuck,
I did not respond to your earlier post, because we have the same
engine, but our FC has the engine upfront. I do not know if the
belts and pullies have the same configuation as an SP 3208, 300 HP.
We use Gates belts, two belts Part # 9600, four part # 9485,
two part # 9415 and one part # 9700. A truck part store or NAPA has
these V belts. This infor mation should be in the BLue Box.
Hope this helps, Maybe someone with an SP can verify these part
numbers.

Bill 88 FC Michigan



--- In WanderlodgeForum@yahoogroups.com, "williamcharrison"
wrote:
>
> Can someone give me the sizes or part numbers for all the engine
> belts. Last trip the engine started to overheat about 20 miles from
> home and i found that both fan belts and both alternator/air pump
> belts were extremely loose. One oddity is that in both cases
> one belt was much looser than the other. I have tightened them all
> but am out of room to tighten the alt. belts any more.
>
> Chuck Harrison
> Akron, Ohio
> 90WLSP36
>