Help! need belt specs for a Cat 3208 in a 90SP36

[dspithaler@...]

Chuck The Alternator 2 matched sets Gates 9600 Power steering
belt & Water pump 2 matched sets Gates 9525 Air compressor 1 Gates 9463
Fan Belt 2 matched sets Gates 9480
The last time I had mine changed my mechanic put on NAPA belts he said
they are good too. He was putting on a compressor at the same time so I said
to do the belts. He said he couldn't get any adjustment out of the
alternator so he went one size smaller. The NAPA numbers are Alternator 2---
9590HD
Power Steering & Waterpump 2---- 9525HD Fan Belt Hub
2----9480HD & I had a Gates 9463 for the Air compressor. You could
cross
it with the NAPA if you go that way. Hops this helps as I was busy today &
ffffor got to look my numbers up.
Don
89 SP 36'
Butler, PA

Can someone give me the sizes or part numbers for all the engine
belts. Last trip the engine started to overheat about 20 miles from
home and I found that both fan belts and both alternator/air pump
belts were extremely loose. One oddity is that in both cases
one belt was much looser than the other. I have tightened them all
but am out of room to tighten the alt. belts any more.

Chuck Harrison
Akron, Ohio
90WLSP36







[Non-text portions of this message have been removed]