Help! need belt specs for a Cat 3208 in a 90SP36

[williamcharrison]

Thanks Don,
On my engine the air compressor and alternator are driven by
the same two belts. Is this correct or has someone screwed up
the belt arrangement?


--- In WanderlodgeForum@yahoogroups.com, dspithaler@... wrote:
>
>
> Chuck The Alternator 2 matched sets Gates 9600 Power
steering
> belt & Water pump 2 matched sets Gates 9525 Air compressor 1
Gates 9463
> Fan Belt 2 matched sets Gates 9480
> The last time I had mine changed my mechanic put on NAPA
belts he said
> they are good too. He was putting on a compressor at the same
time so I said
> to do the belts. He said he couldn't get any adjustment out of
the
> alternator so he went one size smaller. The NAPA numbers are
Alternator 2--- 9590HD
> Power Steering & Waterpump 2---- 9525HD Fan Belt
Hub
> 2----9480HD & I had a Gates 9463 for the Air
compressor. You could cross
> it with the NAPA if you go that way. Hops this helps as I was
busy today &
> ffffor got to look my numbers up.
> Don
> 89 SP 36'
> Butler, PA
>
> Can someone give me the sizes or part numbers for all the engine
> belts. Last trip the engine started to overheat about 20 miles
from
> home and I found that both fan belts and both alternator/air pump
> belts were extremely loose. One oddity is that in both cases
> one belt was much looser than the other. I have tightened them all
> but am out of room to tighten the alt. belts any more.
>
> Chuck Harrison
> Akron, Ohio
> 90WLSP36
>
>
>
>
>
>
>
> [Non-text portions of this message have been removed]
>