Help! need belt specs for a Cat 3208 in a 90SP36

[dspithaler@...]

_I_ (mailto:I@...) Chuck You are right the Air Compressor & the
Alternator are on the same two belts. It is the Air Conditioning Belt that is
the 1 belt it is Gates # 9463. I was up too late last night I guess. Hope I
didn't cause you any problem.
Don
89 SP 36'
Butler, PA

Thanks Don,
On my engine the air compressor and alternator are driven by
the same two belts. Is this correct or has someone screwed up
the belt arrangement?

--- In _WanderlodgeForum@WanderlodgeFWan_
(mailto:WanderlodgeForum@yahoogroups.com) , dspithaler@., dsp
>
>
> Chuck The Alternator 2 matched sets Gates 9600
Power
steering
> belt & Water pump 2 matched sets Gates 9525 Air Conditioning 1
Gates 9463
> Fan Belt 2 matched sets Gates 9480
> The last time I had mine changed my mechanic put on NAPA
belts he said
> they are good too. He was putting on a compressor at the same
time so I said
> to do the belts. He said he couldn't get any adjustment out of
the
> alternator so he went one size smaller. The NAPA numbers are
Alternator 2--- 9590HD
> Power Steering & Waterpump 2---- 9525HD Fan Belt
Hub
> 2----9480HD & I had a Gates 9463 for the Air
Conditioning You could cross
> it with the NAPA if you go that way. Hops this helps as I was
busy today &
> for got to look my numbers up.
> Don
> 89 SP 36'
> Butler, PA
>
> Can someone give me the sizes or part numbers for all the engine
> belts. Last trip the engine started to overheat about 20 miles
from
> home and I found that both fan belts and both alternator/air pump
> belts were extremely loose. One oddity is that in both cases
> one belt was much looser than the other. I have tightened them all
> but am out of room to tighten the alt. belts any more.
>
> Chuck Harrison
> Akron, Ohio
> 90WLSP36
>
>
>






[Non-text portions of this message have been removed]