Diode

[pattypape]

Stephen,

Sorry, the drawing I have still shows a solenoid in the charging
circuit, this is pryor to the diode change, Bennie told me the
solenoids were high failure in the charging circuit, So it was
replaced with the diode. This should not to be confused with the
Aux,
Battery solenoid that adds the Gennie battery to the start circuit.

The diode in our 88 is mounted next to the Aux, Battery solenoid,
behind the air step. There is also a 12V feed to the HWH motor, This
adds to the confusion of multi-tasks at the same junction points.

This diode is about the size of your thumb. I would guess about 70 /
80 Amps. The diode is easy to check with as Ohm Meter, I suspect
that it is very reliable in carrying current and not a high failure
part.
Sorry no part number, try Earl or Radio Shack.

Bill 88 FC


--- In WanderlodgeForum@yahoogroups.com, "Stephen Birtles"
wrote:
>
> Oops
> If anyone has the part number or specs. for the big fat diode I
will
> source and stock them
> Stephen 77fc35
>