Low Water Pressure

[g_man1146]

Hi Paul,
In my case the culprit was the regulator/fill valve. The flow
increased dramatically with the new setup. The tank fills in about
1/2 the time too. My Sporlan valve is next to the filters in #2
roadside bay, behind the pumps, probably the same as yours. I
haven't had to get at it yet so I don't know how much trouble it is.
I'm waiting for you to do it then tell me how!

Rich D. '99LXi43' CT

--- In WanderlodgeForum@yahoogroups.com, "p_a_lazar"
wrote:
>
> --- In WanderlodgeForum@yahoogroups.com, "g_man1146"
wrote:
> >
> > As John said, the problem can be fixed with a change of
regulator
> > and inlet connection.
> > Here is a link to the photos of my change.
>
> Rich,
>
> Among your many skills, I can see you should have been a plumber
> instead of an electrician, LOL.
>
> I, too, have low pressure and removed the inlet valve and do not
have
> a pressure regulator or strainer , just a check valve. I have been
> told that it is probably the sporlan valve that needs cleaning.
Don't
> know where your sporlan valve is located, but mine appears (appears
> because I can't see it, but can hear it when switched) to be buried
> areound the pumps in an impossible area to reach without removing
half
> the plumbing and charcoal filter.
>
> Paul
> 97wb43
>