Mirrors

[Scott]

Dennis, the previous owner of our 86FC hit something and broke the
inner part of the drivers side mirror. The original mirror I have to
look out the drivers side window. We have new Remco mirrors and they
will be adjusted to look out the front windshield. The arms on the
neweer mirrors will stick wayyyy out if pushed out to the side. To get
close to the adjustment from outside put your head against the side of
the coach and adjust till you can see the drivers seat. Then go inside
and finish the adjustment from the seat. BE CAREFUL not to break the
original mirror inside. They are no longer made and very hard to find
replacements. There is a cap with a slot on it, the cap unscrews, under
the cap is a large nut, that is holding the arm in place. You may want
to loosen and retighten once back in place, PB Blaster my be needed! I
would check very closely to be sure they did not break the inside.

If you find they broke something you will need new mirrors ..the bolt
pattern is very hard to match we (Remco and I) are working on a
prototype to have an adjustable bolt pattern on the mirror base. Should
see them in Charlotte next week for final fitting.

Scott B
86FC35 "RUBY" 4SALE
SC

--- In WanderlodgeForum@yahoogroups.com, "walker" wrote:
>
> I have a 84fc 35' I just picked it up at a cat place after an oil
> chance. The drivers side mirror was hit by a truck ?? When we moved
it
> back I had forgot where it should be. I don't use it much. I told
them
> it should stick out like the one on the right, it points to about one
> o'clock. After we got the left one set at about 11 o'clock so it
would
> look the same. I then drove to my storage place and had to look out
the
> windshield to use it. I seems the before I could look at it from the
> side window. Any ideas?
> Dennis Walker
> cram-alot-inn
> kc mo
>