Replacing The High Pressure Power Steering Hose

[pattypape]

WAIT Eric, NO SAWZALL Yet, OUCH!!

On our 88 FC , I removed the batteries and
(maybe the battery tray), Look up under the bumper and cut the wire
ties and loosen the bundle of wires and hoses. Used a crows foot
and a long extention, This is a two person job, to turn the wrench
and the helper must move the crows foot with each 1/8 turn of the
wrench. I think the fittings were the same both ends.

Bill 88 FC


--- In WanderlodgeForum@yahoogroups.com, "Eric Johnson"
wrote:
>
> Got the front end of the coach open and found what appears to be a
leak on the high
> pressure hose on the discharge of the power steering pump. Got a
new hose to install but
> can't figure out how to access the hose connection at the power
steering unit. Read some of
> the earlier posts on this subject. Removed driver's seat, pulled
up the carpet, opened the
> hatch next to the brake pedal and it's not in the right place.
Should I take a sawzall to the
> sheet metal behind the drivers side headlight?
>
> Appreciate your help.
>
> Eric in San Antonio
> 84FC35SBWL2
>