Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Xantrex Prosine 2.0 Charge Settings
08-16-2006, 00:06
Post: #4
Xantrex Prosine 2.0 Charge Settings
Hi Shane,
You need to set your battery type to flooded, the charge
characteristics to factory and the size to 675 Ah. If you do not have
the battery temp sensor, set the temp(cold,warm,hot) to match your
current conditions. If you live where you have extremes, change this
when your seasonal temps set in.

Craig 91WB40 WPB, FL

--- In WanderlodgeForum@yahoogroups.com, "sfedeli3" <sfedeli3@...> wrote:
>
> Hello all,
> Just completed the installation of a Xantrex Prosine 2.0 inverter
> under the guidance and help of Tom Warner in NY. Tom knows his stuff!!
> Anyhow- the question that I have concerns the settings for 6V flooded
> cell batteries. Is anyone aware of a web site that gives the Bulk,
> Absorption and Float rates for the charger settings on the Prosine
> units? I suppose that the rates would be the same for other chargers
> too. I am using the flooded 6V golf cart batteries from Sam's club.
> They are made by Johonson Controls and have 105 Ah of capactity each.
> The total bank contains 315 Ah (3 pairs in series). I was hoping that
> someone out there on the site has the same arrangement/batteries and
> could let me know how they are set up. Tom has the Heart 2500 & Link
> interface which has a different configuration algorithim than mine.
>
> Shane Fedeli
> 85PT40
> Hershey, PA
>
Quote this message in a reply
Post Reply 


Messages In This Thread
Xantrex Prosine 2.0 Charge Settings - sfedeli3 - 08-15-2006, 05:51
Xantrex Prosine 2.0 Charge Settings - Jay Darst - 08-15-2006, 12:04
Xantrex Prosine 2.0 Charge Settings - Jay Darst - 08-15-2006, 12:12
Xantrex Prosine 2.0 Charge Settings - casmith - 08-16-2006 00:06
Xantrex Prosine 2.0 Charge Settings - sfedeli3 - 08-16-2006, 10:33
Xantrex Prosine 2.0 Charge Settings - Jay Darst - 08-16-2006, 10:52



User(s) browsing this thread: 1 Guest(s)