SMI Brake Control - Coach Stop Light Switch

[Gardner Yeaw]

Curt,
Yes there is an adapter (called a converter) for connecting a
three wire trailer to the 4 wire Jeep. The converter uses some kind
of logic to combine the brake and turn signals to use a single light
on each side, but in this circumstance I am going the other way.
There is no simple logic that can seperate the signal. I will need to
get the individual signals for turn and brake at the source. The
brake signal is straight forward, but the turn signal may not be as
easy. Perhaps I am complicating things too much and should just hang
a couple of magnetic lights on the bumper and call it a day.

Gardner
78FC33


--- In WanderlodgeForum@yahoogroups.com, Curt Sprenger
wrote:
>
> Is the Jeep lighting a "foreign" system. I recall needing an
adapter to
> wire a 4 wire import system to a 3 wire utility trailer. Local auto
> parts stores carry the adapters.
>
> Curt Sprenger 1987 PT38, Anaheim Hills, Calif.
>
> Gardner Yeaw wrote:
>
> > Curt,
> > I have since discovered that my brake and turn signal lights are
> > seperate on my Jeep. I may have to come up with a little 'custom'
> > wiring to make this work. I am concerned that the center light on
the
> > jeep will not work, or will blink with the turn signal. It looks
like
> > my advise doesn't work so well for me. I really didn't want to go
> > with a light bar, I have enough stuff to carry around and set up
> > already. I just want to plug the Jeep in and be done with it. I
guess
> > I will need to find the brake light switch after all!
> >
> > Gardner
> > 78FC33
> >
> >
> >
> >
>