SMI Brake Control - Coach Stop Light Switch

[Curt Sprenger]

Dick,
Just got back in town. Had to run (drive) over to AZ for a day. I'm
going to use the light bar for now. Please send the drawings and I'll
keep that on hand for the future. Thanks.

Curt Sprenger 1987 PT38, Anaheim Hills, Calif.



Richard Hayden wrote:

> Curt,
> Are you now not going to use the light bar? If not, I can send you my
> hand drawings from when I hooked up our '96 Jeep Cherokee.
>
> Dick Hayden - '87 PT 38 - Lake Stevens, WA
> ----- Original Message -----
> From: Gardner Yeaw > >
> To: WanderlodgeForum@yahoogroups.com
>
com
> >
> Sent: Wednesday, August 30, 2006 8:47 AM
> Subject: [WanderlodgeForum] Re: SMI Brake Control - Coach Stop Light
> Switch
>
> Curt,
> Yes there is an adapter (called a converter) for connecting a
> three wire trailer to the 4 wire Jeep. The converter uses some kind
> of logic to combine the brake and turn signals to use a single light
> on each side, but in this circumstance I am going the other way.
> There is no simple logic that can seperate the signal. I will need to
> get the individual signals for turn and brake at the source. The
> brake signal is straight forward, but the turn signal may not be as
> easy. Perhaps I am complicating things too much and should just hang
> a couple of magnetic lights on the bumper and call it a day.
>
> Gardner
> 78FC33
>
> --- In WanderlodgeForum@yahoogroups.com
>
com
> >, Curt Sprenger
> wrote:
> >
> > Is the Jeep lighting a "foreign" system. I recall needing an
> adapter to
> > wire a 4 wire import system to a 3 wire utility trailer. Local auto
> > parts stores carry the adapters.
> >
> > Curt Sprenger 1987 PT38, Anaheim Hills, Calif.
> >
> > Gardner Yeaw wrote:
> >
> > > Curt,
> > > I have since discovered that my brake and turn signal lights are
> > > seperate on my Jeep. I may have to come up with a little 'custom'
> > > wiring to make this work. I am concerned that the center light on
> the
> > > jeep will not work, or will blink with the turn signal. It looks
> like
> > > my advise doesn't work so well for me. I really didn't want to go
> > > with a light bar, I have enough stuff to carry around and set up
> > > already. I just want to plug the Jeep in and be done with it. I
> guess
> > > I will need to find the brake light switch after all!
> > >
> > > Gardner
> > > 78FC33
> > >
> > >
> > >
> > >
> >
>
> [Non-text portions of this message have been removed]
>
>