Anyone install a King Dome?

[Ralph L. Fullenwider]

Hi all:

When I installed my king dome, I went down to a local nut and bolt store,
picked up several of the blind nuts used to mount the mirrors on Chevy
pickup trucks and used 1/4 -20 stainless hex head bolts. I also made the
tool from a bolt and 2 nuts to install the inserts with. Worked nicely for me.

Safe travels,

Ralph and Charolette Fullenwider
Ralph's RV Solutions, Duncan, Oklahoma
http://home.swbell.net/rlf47/index.htm

At 02:03 AM 9/1/2006 +0000, you wrote:
>When anchoring to the diamond plate, I would use a few very short
>(1/2") SS screws with the points filed off.
>
>Drill a very generous starter hole since the SS has a hard time
>keeping it's threads intact, or run a steel or hardened steel screw
>in, then back it out and put in the stainless, with perhaps a coating
>of anti-seize for when you want to remove it someday.
>
>You have about 1/4" under the diamond plate b4 the roof starts.
>Walking around up there will wear holes in your roof if you leave the
>points of screws on, or run them in too far.
>
>Gary Miller
>83 FC 33
>Milwaukee area
>
>--- In WanderlodgeForum@yahoogroups.com, "Scott Forman" <sforman@...>
>wrote:
> >
> > How did you anchor it?
> >
> > What's the best way to archor something to the diamond plate roof?
> >
> > Thanks
> >
> > Scott Forman
> > 82 FC35RB
> > Memphis
> >
>