minor problems 91 PT

[Troy Tikalsky]

Will these work with any brand balancing beads in the tires?

Troy Tikalsky
Waconia, MN
1986 Newell


----- Original Message -----
From: Tom Warner
To: WanderlodgeForum@yahoogroups.com
Sent: Monday, September 04, 2006 6:11 PM
Subject: Re: [WanderlodgeForum] minor problems 91 PT


You have to be careful when either letting a tire shop replace your
valve stems or buying them yourself. There is a big difference in
quality today with many of them made in china. I had a bad one and it
turned out it was a chinese stem and had a cheap rubber grommet. Got
all new ones from Prier tire http://www.priertiresupply.com/ very
nice chrome plated ones for aluminum truck wheels $3.29 each (TR
509S) about $3.00 cheaper then chinese ones locally. I bought enough
for all my tires and a few spares to carry with me. They come with
valve cores and a nice chrome plated steel cap with oring.

tom warner
Vernon Center,NY
1985 PT 40

At 06:24 PM 9/4/2006, you wrote:
>I have a few items that are a constant pain. 1)tire valve stems keep
>leaking ,I have replaced them , an in about 30 days when you check the
>air pressure it will keep leaking.2) My fauset in the kitchen keep
>leaking ,I checked the o-ring, it looks good.it now sprays out all
>over.3)My ice maker now will not drop the ice on regular intervals.The
>wire gaurd will remain in the up position when you push it down it
>will drop ice.if any one can give me any advice that would be great.
>Dave 91 WLWB 40
>






[Non-text portions of this message have been removed]