Detectors

[g_man1146]

My manual has a test procedure for the CO detector; it states that
use of a butane lighter to test will damage the sensor. The lighter
is a good way to check the propane sensors but not the CO. (Mine
anyway) Yours may vary.
Rich D. '99LXi43' CT


--- In WanderlodgeForum@yahoogroups.com, David Brady
wrote:
>
> Gardner.
>
> You can test the CO detector with a butane lighter. Just hold
> the lighter up to the detector and dispense the gas.
>
> David B
> '02 LXi, Smokey
> Va
>
> Gardner Yeaw wrote:
> > Everywhere I look there is a detector in my '78FC33. The main
panel
> > in the dining area does not work, but I would like to resurect
the
> > system and get all the detectors working. Does anyone out there
have
> > information on how the detectors work and how to test and/or get
them
> > working again? I assume some are LP and some are CO, but I don't
know
> > for sure.
> >
> > Thanks, Gardner
> > 78FC33
> >
> >
> >
> >
> >
> >
> >
> >
> >
>