Ignition switch

[one_dusty_hoot]

If the key turns all the way to "Start", the pins and sheer
would seem to me be working as a key lock should though.
Graphite powder would definitely help the stickyness.

Wonder? Is there a theft-proof feature on the front that is
not in the rear ignition circuit?

Bob Janes, Greenville, SC


--- In WanderlodgeForum@yahoogroups.com, "Howard O. Truitt"
wrote:
>
> Jim,
> Use compressed air with a spray tube and blow down into key opening.
> Try a squirt of graphite powder in the key switch. Also check the
key for a burr.
> Howard Truitt
> Camilla, Ga.
> 86 PT40
>
>
>
> ----- Original Message -----
> From: brystal9
> To: WanderlodgeForum@yahoogroups.com
> Sent: Sunday, September 24, 2006 12:14 PM
> Subject: [WanderlodgeForum] ignition switch
>
>
> Does anyone know the ignition switch make for 2004 M380. I can
start
> the engine from the rear switch but not the ignition switch. The
keys
> have been a little sticky recently getting in. It seems to turn
all
> the way to start-nothing happens.
>
> thanks,
> Jim O'Neil
> M380
>
>
>
>
>
>
> --------------------------------------------------------------------
----------
>
>
> Internal Virus Database is out-of-date.
> Checked by AVG Free Edition.
> Version: 7.1.405 / Virus Database: 268.12.3/445 - Release Date:
9/11/2006
>
>
> [Non-text portions of this message have been removed]
>