re-doing battery compartment & Cables

[Bob & Carol Howald`]

--- In WanderlodgeForum@yahoogroups.com, "Sid Clark"
<sidclark99@y...> wrote:
>
> --- In WanderlodgeForum@yahoogroups.com, "Bob & Carol Howald`"
> wrote:
> >
> > Well, after all the comment's I might have to reconsider my
> method's.
> > I have used the solder connection in the past and it always
seemed to
> > work good. I used it on my 84pt and it seemed to work very well
for a
> > number of years. I always heated both the wire and the fitting
before
> > inserting the cable into the hot solder. used heat shrink on the
> cable
> > and it always seemed to be ok. I wonder what the difference in
> > resistance is in copper direct verses the solder direct? Now I h






:
Sid Iam not familiar with the epoxy primer. What I"ve used in the
past is just the two part paint that come's in a box and you mix the
two together for use on appliances etc. Tell me about the primer.
I've got the tray's down to bare metal. Thanks Bob 93pt Illinois
> to
> > give this lot's of thought. I have the old charger's out and all
the
> > trays sandblasted , now Iam ready to do the epoxy paint. Thanks
for
> the
> > input and I welcome any more suggestions. I really like doing the
> > solder connections, But? Thanks...Bob 93pt Illinois....
>
> Bob, you gonna put epoxy primer under that?
> Sid Clark in Dallas-91WBSA40