Water leak...

[John]

First of all I want to thank everyone for the replies...all were very
helpful! I got the spoiler off and am in the process of cleaning off
the sealant that was between it and the roof. I agree that it is
probably un-necessary to seal all the way around the spoiler. I think
when I replace it I will mainly just seal around where the screws
enter the roof.

Rob, I found that Home Depot had a Butyl sealant. It Dap Butyl-Flex
rubber sealant. It says Gutter & Flashing on the tube. It was about
$3.50 for the 10oz. tube. McCoys hardware had the NP-1 as well.

Thanks again everyone,
John C


--- In WanderlodgeForum@yahoogroups.com, David Brady wrote:
>
> Rob,
>
> Where do you buy Buytal? I did some internet searches
> an the best I can come up with is ebay.
>
> Thanks,
> David B
> '02 LXi, Smokey
> Va
>
> Rob Robinson wrote:
> > John I would seal the individual mounting holes with Urethane or
Buytal. If
> > the mounting holes in the fiberglass cap have small radiating
stress cracks
> > you could use a self-leveling sealant like Dicor 501 lap sealant
or Sikoflex
> >
> >
> >
> >>>
> >>
> >>
> >
> >
> >
> >
>
>
>
> [Non-text portions of this message have been removed]
>