FC Generator Compartment Walls

[fwernlein]

If you have already installed new insulation or your existing material
is in good sound condition and just can't get it to stay "up"...I
would suggest trying a new adhesive and/or to mount a few insulation
hangers with either an epoxy or 3M 5200 Marine adhesive. "Hangers"
are avail from West Marine and basically are a two part system
consisting of a very large bottomed "thumbtack" that is mounted to the
ceiling with adhesive or screws, the "pin" goes thru the insulation
and a square sliding tab goes over the pin...holding up your
insulation. You can easily slit the insulation and slip one in, then
tape the cut with mylar tape. Hangers like this are common use in
marine engine room applications.

Frank
85FC33
Woodbridge, VA.

--- In WanderlodgeForum@yahoogroups.com, "Scott Forman" <sforman@...>
wrote:
>
> What are they made of? Kryptonite?
>
> I am trying to thread some self-tapping screws into the "ceiling" of
> the compartment to secure my insulation that keeps sagging
regardless
> of the amount of adhesive I apply. Anyone have any tips? I can't
seem
> to get anything to penetrate.
>
> Scott Forman
> 82 FC35RB
> Memphis
>