Shore Water

[Richard Hayden]

Curt, I didn't know you were having this problem at Buellton. I suffered with
this problem on our '81 FC31, and it turned out to be the hot water drain valve
was defective. That's the valve that has a long handle on it and works by
operating the dial from fill to drain. That valve gets calcium build-up just
like the sporlan valves do and have the same result. If your sporlan fill valve
is ok, check the hot water tank drain valve. It has the same effect as the
sporlan fill valve, believe it or not.

Good luck.,

Dick Hayden - '87 PT 38 - Lake Stevens, WA

----- Original Message -----
From: jim riordan
To: WanderlodgeForum@yahoogroups.com
Sent: Tuesday, October 24, 2006 9:53 AM
Subject: Re: [WanderlodgeForum] Shore Water


Did you check the screen at the intake?

Jim Riordan

Curt Sprenger >
wrote:
While at the Buellton rally is past weekend, I hooked up to shore water
and got almost zero water flow. The tank fill switch was in the off
position. I don't have the water flow diagram. Suggestions appreciated.
To get around the problem, I filled the water tank and used the water pump.

--
Curt Sprenger 1987 PT38 8V92, Anaheim Hills, Calif.


---------------------------------
How low will we go? Check out Yahoo! Messenger's low PC-to-Phone call rates.

[Non-text portions of this message have been removed]





[Non-text portions of this message have been removed]