oil drain plug

[Bob & Carol Howald`]

Rob: I've been there, I had a 841/2 pt 40 with a worn out drain plug
just like your's. I took a 1/2 socket and a electric welder and welded
it to the bottom of the plug. All I had to do then was to take the
rachet and turn it out. Worked GREAT , in fact it worked so good I just
left the socket on there and continued to use the same drain plug. It
just take's a few passes with the stick and won't get the oil too hot.
Good Luck.....Bob 93pt40 Illinois