What should be cost for changing out oil cooler hoses?

[John]

"Remove the clamps and use the fingers to loosen the hose around the
barb. Most any place that sells tools will have the finger tools,
that's what I call 'em maybe hose removal tool would be a good name."
,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,

Good Morning Mike,

Here is a link with a picture of your "hook like thingy"

http://tinyurl.com/bk4vu


"REMEMBER SEPTEMBER 11, 2001"
John Finn
'82 35FCRB
BLUEBIRD WANDERLODGE
TO VISIT THE "FINN'S INN EXPRESS" REMODELING ADVENTURE
GO TO;
http://www.pbase.com/image/24977457
'66 SUPERIOR / IH 392 GAS V8 32' PUSHER "FOR SALE"
SEE THE OLD COACH AT:
http://www.pbase.com/image/26052733
HOPKINS, SOUTH CAROLINA

/////////////////////////////////////////

--- In WanderlodgeForum@yahoogroups.com, "Mike Hohnstein"
<MHOHNSTEIN@w...> wrote:
> Changing them isn't bad, you need a couple of mechanic fingers a
couple of inches long and couple of 5 gallon buckets to catch the
glycol. Drain the radiator after turning off all the faucet type
valves you can find and the road side block drain. Remove the clamps
and use the fingers to loosen the hose around the barb. Most any
place that sells tools will have the finger tools, that's what I
call 'em maybe hose removal tool would be a good name. I use them
constantly when doing maintenance work. Just a hook like thingy with
a screw driver like handle. Use the "lined" type clamps exclusively
on your bird, you won't be happy if you let shops work on your bus,
most worker bees in truck shops hate buses. You really need to be
comfortable with fuel filter changing techniques. It will be a
required skill. If you don't have an electric pusher fuel pump back
by the rear axle, you should install one very soon.
> Mike Hohnstein
> Germantown, WI
> ----- Original Message -----
> From: Jon
> To: WanderlodgeForum@yahoogroups.com
> Sent: Monday, April 18, 2005 10:54 PM
> Subject: [WanderlodgeForum] What should be cost for changing out
oil cooler hoses?
>
>
>
> Sence I have never dealt with changing these hoses, how many
hours do
> you think it would take a shop to change these out? Jon
> Jon Lechich
> 1978Wonderlodge
> Bremerton Washington
>
>
>
>
>
> --------------------------------------------------------------------
----------
> Yahoo! Groups Links
>
> a.. To visit your group on the web, go to:
> http://groups.yahoo.com/group/WanderlodgeForum/
>
> b.. To unsubscribe from this group, send an email to:
> WanderlodgeForum-unsubscribe@yahoogroups.com
>
> c.. Your use of Yahoo! Groups is subject to the Yahoo! Terms of
Service.
>
>
>
> [Non-text portions of this message have been removed]