Microwave/Convection Oven

[Leroy Eckert]

Mike:
My Sharp Model will not work in your application. It's R-1874 approximately
30" wide. I looked at Sharp's web site and it appears that the 930 model will
work. When I changed mine out the wall mount structure was different (no
problem) and I had to drill another hole for the electrical cord because the new
model was different.

Suggestions: Talk to the supplier and understand the wall mount bracket before
purchasing and see if it will work for you.

Leroy Eckert
1990 WB-40
Niceville, FL






----- Original Message -----
From: Mike McMahan
To: WanderlodgeForum@yahoogroups.com
Sent: Monday, November 06, 2006 4:25 PM
Subject: [WanderlodgeForum] Re: Microwave/Convection Oven


Leroy, The dimensions of the Sharp I removed are 24 5/8(w) x 15 3/4
(h) x 18 3/4 (d). I believe the model number was R8580A. Thanks
for your help. Mike McMahan

--- In WanderlodgeForum@yahoogroups.com, "Leroy Eckert"
wrote:
>
> Mike:
> I recently replaced our Sharp but do not have the Model # in front
of me. It fit perfectly in the slot and works far better than the
original. If you will e-mail me your dimensions, width, height and
depth, I will be up to the bus tomorrow and see if my model will fit
your coach.
>
> E-mail http://www.jwasnewski@...
>
> Leroy Eckert
> 1990 WB-40
> Niceville, FL
>
>
>
>
>
>
>
>
>
> ----- Original Message -----
> From: Mike McMahan
> To: WanderlodgeForum@yahoogroups.com
> Sent: Wednesday, November 01, 2006 5:51 PM
> Subject: [WanderlodgeForum] Microwave/Convection Oven
>
>
> Well the original Sharp Microwave/Convection Oven in my 1989
PT40
> finally died. It is a Model R8580A. I remember several of you
have
> replaced yours and I was checking to see if any of you could
tell me
> what later model units would fit well in the built in space in
the
> bird. I was told that a Sharp R930 was close but I wanted to
check
> with the group. Thanks, Mike McMahan 1989 PT Counting the days
until
> leaving for South Padre Island for Christmas break
>
>
>
>
>
> [Non-text portions of this message have been removed]
>





[Non-text portions of this message have been removed]