Who can rebuild a backup monitor?

[jqrjr]

I had a problem with the monitor pulsing, and reverse view...I bought a
color voyager by audiovox with a camera that pivots. camera fit in the
space the old camera was wiring was a little bit of a hassle. removed
the screen with tube put a piece of smoke gray lexan over hole and
mounted the lcd display on it...well worth the effort. See the toad see
almost the back of the bus, see all the way down the road. really happy
with the result

Jim Riordan
88 WBWL XXV
Stuart, Fl.

--- In WanderlodgeForum@yahoogroups.com, "Howard O. Truitt"
wrote:
>
> Alan,
> I had a problem with my monitor flickering. I took the monitor out
and removed the circuit boards and took a good magnifying glass and
inspected the solder joints some were cracked. After resoldering the
monitor works perfect. In front of the camera is a 1/4" pc. of
plexiglass that was crazed badly. After replaceing that I now have a
good sharp clear picture. Hope this helps.
> Howard Truitt
> Camilla, Ga.
> 86 PT40
>
>
> [Non-text portions of this message have been removed]
>