Installing Aux Battery & Prepping Box

[Curt Sprenger]

Line-x. The truck bed spray in lining. That's what I'm thinking. When I
get to that project.

Probable need to remove the battery tray, clean it REAL GOOD with baking
soda, then take it to the Line-x folks.

I'm open to better suggestions.

Curt Sprenger
1987 PT38 8V92 "MacAttack Racing"
Anaheim Hills, Calif.



Andy Coleman wrote:

>Hello Leroy;
>
>Thanks for your response!
>
>I love POR-15. I have another bus, a 69' Dodge, that is covered with
>it. Once painted, it never rusts again!
>
>However, the POR on my 69's battery tray is bubbling and peeling off
>from the battery acid. Its not very resistant. Unfortunately.
>
>POR-15 was my first guess to.
>
>Anybody have any other paints or coatings that might work?
>
>Andy
>
>
>
>
>--- In WanderlodgeForum@yahoogroups.com, "Leroy Eckert"
> wrote:
>
>
>>Andy: Battery box paint. POR-15 for sure.
>>
>>Leroy Eckert
>>1990 WB-40 Smoke N Mirrors
>>Niceville, FL
>>
>>
>>
>>
>> ----- Original Message -----
>> From: Andy Coleman
>> To: WanderlodgeForum@yahoogroups.com
>> Sent: Tuesday, November 14, 2006 5:02 PM
>> Subject: [WanderlodgeForum] Installing Aux Battery & Prepping Box
>>
>>
>> Fellow Wanderlodgers:
>>
>> I'm in the process of installing an auxilliary starting battery in the
>> passenger front storage box of my 83' FC-35.
>>
>> Like many of you, I don't like the idea of having to fire up the
>> generator to start the bus after running the lights all night.
>>
>> In preparation for the battery installation, I've been removing the
>> stock felt that lines the inside of the front passenger box. Can
>> anybody recommend a paint that might stand up to a battery? I imagine
>> that I should also vent the box to prevent a build up of battery gases
>> - which is why I'm worried about the paint.
>>
>> Also, what size battery should I install? Half my box is taken up
>> with the engine air filter - so I don't have much room. My
>> Caterpillar mechanic told me that it is best to have two batteries in
>> sequence to start a big diesel engine. If I only have space for one,
>> what size should I use?
>>
>> Thanks everyone! I'll be posting photos of my air intake modification
>> with part numbers for everyone to use soon. My mod is a version of
>> the idea that Randy installed in Bruce's FC.
>>
>> Andy Coleman
>> Spring Lake Heights, NJ
>> 83' FC-35
>>
>>
>>
>>
>>
>>[Non-text portions of this message have been removed]
>>
>>
>>
>
>
>
>
>
>
>Yahoo! Groups Links
>
>
>
>
>
>
>