Slideout Problems

[luckyron1]

We had several slide issues with our 2000 LXI. In the process, we
learned that the previous owner had been to the factory for a NEW
SEAL, and also for some repairs to the slide finish because of BB
engineering and Owner operation issues. We took it to HWH twice
before we got to the root of the problem. BB had improperly
installed the NEW SEAL generating a host of expensive problems for
us. HWH installed another NEW SEAL and showed us how the job had
been botched by BB. I haven't gotten around to bringing it to the
attention of BB management yet, but, in fairness to them I will be
contacting them for their response.

luckyron near Dallas,TX

--- In WanderlodgeForum@yahoogroups.com, "adieu2y"
wrote:
>
> David, I've had several issues with our 2005 (3 slides) so it is
hard
> to remember which was which. I do remember we had several problems
> with our 2001 LX. The factory autorized Holland Motor to replace
the
> seal. I remember it took 2 men 12 hours. The second problem was with
> alignment. Wendel and/or Jessie at the factory found it neccessary
to
> make very small adjustments. The slide caused some interesting
delays
> when it would not retract. After these 2 major fixes we did not
> experience any more problems. I wish you well in finding the
gremlins.
> Jack VanDenberg Lxi 05
> --- In WanderlodgeForum@yahoogroups.com, David Brady
wrote:
> >
> > I haven't heard of any problems. I have an '02 LXi and the
> > slide and landing gear have been reliable, both are made
> > by HWH. I'm not sure what technology the '01 LX uses -
> > in house or HWH.
> >
> > David Brady
> > '02 LXi, Smokey
> > Va, soon to be NC
> >
> > cochranstephen wrote:
> > > I have a 2001 Xl and have had a lot of problems with the
slideout, it
> > > has been the safty switches, the seal, or the leverlers not
working
> > > It goes from one thing to another. Dones any one know if these
models
> > > are having above average problems.
> > >
> > >
> > >
> > >
> > >
> > >
> > >
> > >
> > >
> >
>