HWH jack wont retract

[Robert Britton]

Bruce,
Check the pivot points closely, on my 87FC the hole for the pivot
bolt had rounded out and caused some binding, the spring was not
strong enough at that point to bring the jack up to the stored
position. I had to take the jack off (it's heavy) and weld the hole,
then re-drill to proper size.

Robert Britton
87FC
Hollister, California



--- In WanderlodgeForum@yahoogroups.com, "birdshill123"
wrote:
>
> The left front jack on my 88 FC wont fully retract. The piston
returns
> all the way but the knee action does not go to horizontal. I lubed
all
> the pivot points. Still wont return to horizontal. HWH trouble
shooting
> chart suggests the actuator may be at fault. I can get the jack to
> retract by manually pushing it up to horizontal. I examined the
> actuator rod and it does not appear bent or scored. It is stiff.
Can
> these be rebuilt or is it just better to get a new one? HWH web
site
> shows that actuator to be $150.00 OUCH ! I read where John Finn
had
> his whole system rebuilt for about $900 plus at the HWH factory.
Almost
> makes me want to do the whole works.
>
> Bruce 88 FC35
>