LCD TV MOUNT

[jqrjr]

RCA audio Outputs from TV to a small auto amp. I mounted the amp in
the front of the coach connected the amp outpust to the speaker leads
powered it with a 12v lead in from the bus up front. I put a switch
inline so that I could shut off the power to the amp.

Jim


--- In WanderlodgeForum@yahoogroups.com, "Robert Britton"
wrote:
>
>
> Jim,
> On the subject of conecting the old speakers to the new tv, could
you
> give a little more info on the amp and how you made the conection
> from the new tv to amp, were you able to just use the RCA lack for
> that? And where did you get the amp?
>
> Thanks!
>
> Robert Britton
> 87FC
> Hollister, California
>
>
>
>
> --- In WanderlodgeForum@yahoogroups.com, "jqrjr" wrote:
> >
> > HI
> >
> > I have a 88 WLWB XXV. I have mounted a 23" sony lcd tv in the
front
> > of my coach. This coach has cabinets on both the port(left) and
> > starboard (right) sides of the coach. The original tv was mounted
> in
> > the center using an elaboratly constructed custom bracket.
> Basically
> > I used a LCD flat wall mount purchased from the same places I
> > purchased the the TV and a couple of pieces of unistrut. The
mount
> > and the unistrut are mounted behind the board which used to
> surround
> > the tv and to which the braket was fastened. The TV fits
perfectly
> > between the two doors. It is basically a surface mount. It
> completly
> > covers the hole for the old tv, the look is good, I could remove
it
> > and put the old tv back in place and you would never know that I
> had
> > changed it. as far as sound since the old tv had been taken apart
> to
> > hook up to the speakers and the new tv had RCA jacks, I just used
a
> > small 12dc auto amp wired the speakers and tv to it. put a small
> > switch under tv to on and off the amp, works great...especially
> with
> > the immotion sat dish on top.
> >
> > Jim Riordan
> > 88 WLWB XXV
> > Stuart, Fl.
> >
>