Putting in a Fantastic Fan in the kitchen

[Leroy Eckert]

This may be a long shot.
Is it possible to disconnect the hot wire at the light fixture, attach .032
safety wire to it and pull it back to the light switch. Attach a second wire to
the .032 safety wire and pull both wires back to the light fixture.( Tape the
end before pulling) Connect the fan wire to the constant hot side of the light
switch. Reconnect the light fixture wire. Find a place in the fixture or the
fan housing to fuse the fan line per manufactures spec's. Then you need the
ground.
I have used this procedure to pull wires with excellent results.
Your post indicates the light is 12v, I hope. I have ignored the possible need
for a relay.

Leroy Eckert
1990 WB-40"Smoke N Mirrors
Niceville, FL


----- Original Message -----
From: Bob Lawrence
To: WanderlodgeForum@yahoogroups.com
Sent: Friday, January 19, 2007 7:24 PM
Subject: [WanderlodgeForum] Putting in a Fantastic Fan in the kitchen


Hi group,
I have a roof vent in the kitchen that isn't motorized and I want to
change it to a Fantastic fan.
Problem is there is no 12v close by. I have a ceiling light by the
sink, but since it is controlled by a switch at the sink, it doesn't
seem to me right to tap into the wires at the light. I would have to
leave the light on all the time.
The only other think I can think of is to take a plumbers tape and go
across to the back of the fridge and poke a hole in the ceiling panel
and get power that way.
Anybody do this mod and get power some other way?

Bob Lawrence
84 PT 36
Tacoma, Wa. (with 8 months left before we fulltime outta here)





[Non-text portions of this message have been removed]