Putting in a Fantastic Fan in the kitchen

[Bob Lawrence]

Thanks, Leroy,
That might be possible...thanks again.
Bob
--- In WanderlodgeForum@yahoogroups.com, "Leroy Eckert"
wrote:
>
> This may be a long shot.
> Is it possible to disconnect the hot wire at the light fixture,
attach .032 safety wire to it and pull it back to the light switch.
Attach a second wire to the .032 safety wire and pull both wires back
to the light fixture.( Tape the end before pulling) Connect the fan
wire to the constant hot side of the light switch. Reconnect the
light fixture wire. Find a place in the fixture or the fan housing
to fuse the fan line per manufactures spec's. Then you need the
ground.
> I have used this procedure to pull wires with excellent results.
> Your post indicates the light is 12v, I hope. I have ignored the
possible need for a relay.
>
> Leroy Eckert
> 1990 WB-40"Smoke N Mirrors
> Niceville, FL
>
>
> ----- Original Message -----
> From: Bob Lawrence
> To: WanderlodgeForum@yahoogroups.com
> Sent: Friday, January 19, 2007 7:24 PM
> Subject: [WanderlodgeForum] Putting in a Fantastic Fan in the
kitchen
>
>
> Hi group,
> I have a roof vent in the kitchen that isn't motorized and I want
to
> change it to a Fantastic fan.
> Problem is there is no 12v close by. I have a ceiling light by
the
> sink, but since it is controlled by a switch at the sink, it
doesn't
> seem to me right to tap into the wires at the light. I would have
to
> leave the light on all the time.
> The only other think I can think of is to take a plumbers tape
and go
> across to the back of the fridge and poke a hole in the ceiling
panel
> and get power that way.
> Anybody do this mod and get power some other way?
>
> Bob Lawrence
> 84 PT 36
> Tacoma, Wa. (with 8 months left before we fulltime outta here)
>
>
>
>
>
> [Non-text portions of this message have been removed]
>