Speedometer programming

[Don Bradner]

Thanks, Leroy, those are as good as any to try for starters. I'll be able to
test on Wednesday.

For those who said "check with the manufacturer of the speedometer," who made
it? Only markings on the back are Blue Bird.

I called BB rather late today (but before they close), and as in all previous
calls got Jessie's voice mail and no call back. Will be interesting to see if I
ever do.

On 2/5/2007 at 4:31 PM Leroy Eckert wrote:

>Don:
>My dip switches are 2, 3, and 6 on.
>
>Leroy Eckert
>1990 WB-40"Smoke N Mirrors"
>Niceville, FL
>
>
>
>
> ----- Original Message -----
> From: Don Bradner
> To: WanderlodgeForum@yahoogroups.com
> Sent: Sunday, February 04, 2007 10:51 PM
> Subject: Re: [WanderlodgeForum] Speedometer programming
>
>
> It would be great if you could take a look - it is likely that ours
>should be the same.
>
> When I drove it out of Phoenix last month I knew it didn't feel right
>for the indicated speed, so I set it at 60 on the cruise and used the
>stopwatch to time a mile, then several more miles (using the ubiquitous
>mile markers on I-10). I was running above 70 seconds per mile, and the
>truck traffic was blowing around me. When I drove yesterday with VMSpc
>running, it was showing 35 when the speedometer was above 45.
>
> On 2/4/2007 at 7:18 PM Leroy Eckert wrote:
>
> >I haven't noticed the variance on mine. I have checked it with those
> >roadside radar detectors that are every 20 miles down here, if you can
> >believe those, and it appears to be very close. It will be interesting
>to
> >see the speed on my VMSpc when I get it going.
> >
> >If you want I will look and see how my switches are set. Otherwise, I am
> >no help.
>
> Don Bradner
> http://www.arcatapet.net
>
>
>
>
>
>[Non-text portions of this message have been removed]
>
>
>
>
>Yahoo! Groups Links
>
>
>

Don Bradner
http://www.arcatapet.net