Speedometer programming

[Leroy Eckert]

Ok, I hope it works for you.

Leroy Eckert
1990 WB-40 "Smoke N Mirrors"
Niceville, FL


----- Original Message -----
From: Don Bradner
To: WanderlodgeForum@yahoogroups.com
Sent: Tuesday, February 06, 2007 3:34 PM
Subject: Re: [WanderlodgeForum] Speedometer programming


Just had a callback from Jessie, and he says yours is the factory default; no
other info available. I will report if that does the job.

On 2/5/2007 at 4:31 PM Leroy Eckert wrote:

>Don:
>My dip switches are 2, 3, and 6 on.
>
>Leroy Eckert
>1990 WB-40"Smoke N Mirrors"
>Niceville, FL
>
>
>
>
> ----- Original Message -----
> From: Don Bradner
> To: WanderlodgeForum@yahoogroups.com
> Sent: Sunday, February 04, 2007 10:51 PM
> Subject: Re: [WanderlodgeForum] Speedometer programming
>
>
> It would be great if you could take a look - it is likely that ours
>should be the same.
>
> When I drove it out of Phoenix last month I knew it didn't feel right
>for the indicated speed, so I set it at 60 on the cruise and used the
>stopwatch to time a mile, then several more miles (using the ubiquitous
>mile markers on I-10). I was running above 70 seconds per mile, and the
>truck traffic was blowing around me. When I drove yesterday with VMSpc
>running, it was showing 35 when the speedometer was above 45.
>
> On 2/4/2007 at 7:18 PM Leroy Eckert wrote:
>
> >I haven't noticed the variance on mine. I have checked it with those
> >roadside radar detectors that are every 20 miles down here, if you can
> >believe those, and it appears to be very close. It will be interesting
>to
> >see the speed on my VMSpc when I get it going.
> >
> >If you want I will look and see how my switches are set. Otherwise, I am
> >no help.
>
> Don Bradner
> http://www.arcatapet.net
>
>
>
>
>
>[Non-text portions of this message have been removed]
>
>
>
>
>Yahoo! Groups Links
>
>
>

Don Bradner
http://www.arcatapet.net





[Non-text portions of this message have been removed]