power problem on 88 pt 40

[Curt Sprenger]

Robert & Teri,
From the information that Teri sent I agree with the others, it's a 12V
problem.

A summary of things to check:
1) find the DC Master Switch and turn it on-off-on a few times. Our '87
has that switch under the drivers dash area. Be sure the wires are tight.

2) find the A/T Switch (Anti-Theft) and be sure it is set to OFF. Our
coach has that switch on the right side of the dash in front of the
driver.

3) check that the A/T switch (that may be a Bugler Alarm) outside the
entry door is set to OFF.

4) find the Electronic Master Switch and be sure it is set to ON. Our
coach has that switch in the upper cabinet above the glass door cabinet,
above the U-Line. There should be a fuse or circuit breaker somewhere
that works with the switch.

5) Mike Bulriss offered some good suggestions.

Good luck.

Curt Sprenger
1987 PT38 8V92 "MacAttack Racing"
Anaheim Hills, Calif.