Hard Surface Flooring-Long Post
|
02-26-2007, 11:35
Post: #4
|
|||
|
|||
Hard Surface Flooring-Long Post
I can add two more links for those who may chose to upgrade a coach or their
home in the future, and my be considering natural stone. http://www.ntc-stone.com http://www.mbstone.com NTC is the National Training Center for the Stone and Masonery Trades of which I am a affiliated member. I have trained under Mr. Fred Heuston. MB Stone is operated by Mr. Maurizo Bertoli, a world respected stone expert. I have spent many hours on the telephone with Mr. Bertoli regarding polishing of granite. I use his products because they are the best I have ever found. Both sites provide interesting reading an analysis of natural stone products. I have 3,000 sq.ft. of Travertine, Granite, Onyx and Marble in my home. None if it is sealed, 5 humans live here including 3 kids. Two of the children have learned to skate on the Travertine floor. I have not had any problems with the product. Myth busters is alive and well, right here in my home. Thanks, Leroy Eckert 1990 WB-40"Smoke N Mirrors Niceville, FL ----- Original Message ----- From: ac7880 To: WanderlodgeForum@yahoogroups.com Sent: Monday, February 26, 2007 7:59 AM Subject: [WanderlodgeForum] Re: Hard Surface Flooring-Long Post I saved this link a while back about counter top materials. Some of it may cross over into the flooring discussion. It is a PDF file. http://images.hgtvpro.com/pac/fine_homeb...ber_featur e_02.pdf tiny url: http://tinyurl.com/juz6e Dan --- In WanderlodgeForum@yahoogroups.com, "jwasnewski" > > > I am a California CPA who decided to get into the hard surface > flooring business 11 years ago. I think I'll go back to doing tax > returns. It is less stressful. > > General information on hard surface flooring, without being technical. > > Granite: Very hard, tough surface, very good for floors and counter > tops. Some granites(some.....very few......) are porous and need to > be sealed. Sealing granite that needs to be sealed is a very easy > process. Granite is very difficult to scratch.(go ahead , cut the > steaks on it, put the wine and beer on it). Typical granites are just > below diamonds in hardness. Natural granites are composed of > approximately 65-75 percent quartz. The granite bacterial growth > myth was developed by companies competing with suppliers of natural > materials. There is not a single documented case of bacterial growth > in granite, that I know of. Generally, granite is not affected by > acid. However, one acid, a component in Tilex, will destroy the > shine on granite. It is hydrofloric acid. Granite can be repolished > by a trained technician but it is expensive. Beware of epoxy filled > and stained material from Asia. It's cheap, and you get what you pay > for.. > > Marble: A soft natural material, available in numerous colors, > patterns, and forms and comes from various parts of the World. By > nature and definition acidic compounds etch marble. I did not say > stain, I said etch. Foods containing vinegar or other types of acid > will take the shine off of marble in seconds. As well, sand is your > enemy with marble. Marble can be repolished by trained technicians > and is relatively inexpensive to do. Beware of green marble because > it is sensitive to water and tends to turn white(efflorescence or > spalling) if exposed for any period of time. In addition, if you use > normal installation techniques on green marble it will warp, and > generally do weird thing causing you to do it all over again. There > are numerous restuarants in Italy with marble tops. The difference > is this. They do not give a !@#$ if the marble shines of not. > > Ceramic Tile: Ceramic tile comes in all shapes and sizes, typically > has a glazed surface and a baked mud body. With proper care, ceramic > will last for years. Typically, ceramic tile is not affected by food > acids. However, sulfamic and muriatic acid can etch ceramic tile. It > is possible to drop something on the glazed ceramic tile and chip > it. If that happens, just purchase a small bottle of appliance paint > and touch it up. > > Porcelain Tile: A relatively new type of flooring. It is very hard > and will last for years..Easy to clean and is not affected by food > acids. There are glazed, rough surfaced and through body products. > It must be installed correctly or it will break bond. Breaking bond > means you get to replace the floor, there is no other cure. It is > more difficult to install than ceramic tile and depending on the > manufacturer can be very difficult to cut. (Beware, a broken piece of > Porcelain tile can lay you open like a surgeon.) > > I could go on but wanted provide some free info to those interested. > > I am not cheap when I do inlaid wood into granite, marble, corian or > porcelain products. Or any combination thereof. . However, it is > beautiful when I complete the job. > > I will not get into carpet and wood, that is Ernie's deal but I would > like to say this. And, please, I do not want to hurt anyone feelings > here but if I had 22 year old carpet in my coach, I would off it for > new stuff just because................it is long past time to do so. > > Leroy Eckert > 1990 WB-40"Smoke N Mirrors" > Niceville, FL > [Non-text portions of this message have been removed] |
|||
« Next Oldest | Next Newest »
|
Messages In This Thread |
Hard Surface Flooring-Long Post - jwasnewski - 02-25-2007, 15:50
Hard Surface Flooring-Long Post - ernieekberg@...> - 02-26-2007, 01:19
Hard Surface Flooring-Long Post - ac7880 - 02-26-2007, 01:59
Hard Surface Flooring-Long Post - Leroy Eckert - 02-26-2007 11:35
|
User(s) browsing this thread: 2 Guest(s)