Sharp convection microwave model R930CS for my 90SP36 needed....WHERE???

[Mike Hohnstein]

A local guy fixed my original Sharp Convection/Micro, a couple of micro
switches. Said; DON'T OPEN DOOR WHEN THE OVEN IS OPERATING, SHUT IT OFF FIRST!
He was very assertive about that point.
MH
----- Original Message -----
From: Harold Prescott
To: WanderlodgeForum@yahoogroups.com
Sent: Friday, March 02, 2007 11:14 AM
Subject: [WanderlodgeForum] Re: Sharp convection microwave model R930CS for my
90SP36 needed....WHERE???


--- In WanderlodgeForum@yahoogroups.com, "Ron & Patty"
wrote:
>
> Keith,
>
> Congrats with the new bus! According to the guy that repaired my
> Sharp, he said they are well worth keeping. You'll have to removed
> all the stainless panels around the unit and remove screws from the
> bottom. Anyway, once you get it out (it's a little heavy) you can
> remove the face and find a fuse inside there. Check the fuse first.
> If it continues to blow, you might have it repaired. Mine was for
> about $70.
>
> Ron, No. California
> 85PT36
>
> PS. Make sure your jacks are retracted before filling with fluid or
> you'll get an ATF bath.
>
> Are these things worth repairing? And how do
> > you get them out of the mounting?
> >
> > --- In WanderlodgeForum@yahoogroups.com, "Henry Jay Hannigan"
> > wrote:
> > >
> > > Where is a bargain source for subject model??
> > > Any deals out there?
> > > Thanks,
> > > Hank Hannigan
> > > 90SP36
> > >
> >
>
Ron,
Where is that fuse for the Sharp convection microwave located exactly.
Also, did you find someone to work on it in the Sacto area?
I ran mine without anything inside. I know, it says in the book not
to operate the oven empty....oops

Harold Prescott
'85 FC35
Northern California





[Non-text portions of this message have been removed]