Replacing the pulley on a FC to fix the belt issues

[fourrubberfeet]

Joe:
I have a 1982 35 3208T aftermarket turbo engine installed.I have had no
problems with belts coming off.I have removed my AC dash unit due to
seized compressor bearing.You may want to check that.I updated to a
Horton air fan clutch and updated my power sterring pump.If the
compressor bearings are ok I would take a close look at the alignment
of the pullys with a straight edge.
Ken Kalmakoff
1982 35 3208t
Richmond BC

>
> I am going to purchase an 82FC 3208T that has no A/C belt due to what
> the owner says was the tendancy for the belt to come off and take the
> other belts with it. He mentioned something about using a pulley off
a
> Mack with 3 v-grooves to replace the 2 groove pulley and routing the
> belt differently to prevent the issues.
>
> Anybody out there know more details for this. I would like to get
the
> parts ordered early and have them ready when I pick up the coach.
>
> Regards,
> Joe Desmond
>