Teleflex Gauges

[pattypape]

Curt,

Earl at BB has a reasonable price on gages, He also has the Teleflex
gage part numbers, the original gage with the silver trim is no
longer available, But with care and a screw driver the bezel can be
removed and installed on the new gage to match the others in the dash.
A Silver felt permanent marker and a steady hand will touch up the
Silver trim on all gages very nicely.
The sensors are most important and Joe at Teleflex tech support is
very helpful. He has the part numbers to match the sensors and gages.
There is a universal Stuart Warner sensor that is easily available
at parts stores that will match these gages.It has several sizes of
bushings to match all the standard thread sizes. Joe can help with
these part numbers.
Teleflex also has a gage trouble shooting guide online.
Sorry, but all my part numbers and website address are back in
Michigan.
I have not changed the angle of the gages , But new bulbs may help

Bill 88 FC




--- In WanderlodgeForum@yahoogroups.com, Curt Sprenger
wrote:
>
> I need to replace the generator oil gauge and the coolant gauge. The
oil
> gauge is shot, the coolant gauge needs a new sender. They are the
> Teleflex gauges. I've done research and have not found the same
> gauges/sending units. Also, would like to angle the gauges in their
> mounting so they are readable from the drivers seat. What have others
> done to remedy this?
>
> --
> Curt Sprenger
> 1987 PT38 8V92 "MacAttack Racing"
> Anaheim Hills, Calif.
>