Teleflex Gauges

[Curt Sprenger]

Bill,
Thank you for your reply. I'll follow up with Earl and Teleflex.

Curt Sprenger
1987 PT38 8V92 "MacAttack Racing"
Anaheim Hills, Calif.



pattypape wrote:

> Curt,
>
> Earl at BB has a reasonable price on gages, He also has the Teleflex
> gage part numbers, the original gage with the silver trim is no
> longer available, But with care and a screw driver the bezel can be
> removed and installed on the new gage to match the others in the dash.
> A Silver felt permanent marker and a steady hand will touch up the
> Silver trim on all gages very nicely.
> The sensors are most important and Joe at Teleflex tech support is
> very helpful. He has the part numbers to match the sensors and gages.
> There is a universal Stuart Warner sensor that is easily available
> at parts stores that will match these gages.It has several sizes of
> bushings to match all the standard thread sizes. Joe can help with
> these part numbers.
> Teleflex also has a gage trouble shooting guide online.
> Sorry, but all my part numbers and website address are back in
> Michigan.
> I have not changed the angle of the gages , But new bulbs may help
>
> Bill 88 FC
>
> --- In WanderlodgeForum@yahoogroups.com
> , Curt Sprenger
> wrote:
> >
> > I need to replace the generator oil gauge and the coolant gauge. The
> oil
> > gauge is shot, the coolant gauge needs a new sender. They are the
> > Teleflex gauges. I've done research and have not found the same
> > gauges/sending units. Also, would like to angle the gauges in their
> > mounting so they are readable from the drivers seat. What have others
> > done to remedy this?
> >
> > --
> > Curt Sprenger
> > 1987 PT38 8V92 "MacAttack Racing"
> > Anaheim Hills, Calif.
> >
>
>