Teleflex Gauges

[Curt Sprenger]

Thanks Mike.

Curt Sprenger
1987 PT38 8V92 "MacAttack Racing"
Anaheim Hills, Calif.



mbulriss wrote:

> Teleflex gauge information is in the "Parts" Database on the
> WanderlodgeForum home page.
>
> Mike Bulriss
> 1991 WB40 "Texas Minivan"
> San Antonio, TX
>
> --- In WanderlodgeForum@yahoogroups.com
> , "pattypape"
> wrote:
> >
> > Curt,
> >
> > Earl at BB has a reasonable price on gages, He also has the Teleflex
> > gage part numbers, the original gage with the silver trim is no
> > longer available, But with care and a screw driver the bezel can be
> > removed and installed on the new gage to match the others in the dash.
> > A Silver felt permanent marker and a steady hand will touch up the
> > Silver trim on all gages very nicely.
> > The sensors are most important and Joe at Teleflex tech support is
> > very helpful. He has the part numbers to match the sensors and gages.
> > There is a universal Stuart Warner sensor that is easily available
> > at parts stores that will match these gages.It has several sizes of
> > bushings to match all the standard thread sizes. Joe can help with
> > these part numbers.
> > Teleflex also has a gage trouble shooting guide online.
> > Sorry, but all my part numbers and website address are back in
> > Michigan.
> > I have not changed the angle of the gages , But new bulbs may help
> >
> > Bill 88 FC
> >
> >
> >
> >
> > --- In WanderlodgeForum@yahoogroups.com
> , Curt Sprenger
> > wrote:
> > >
> > > I need to replace the generator oil gauge and the coolant gauge. The
> > oil
> > > gauge is shot, the coolant gauge needs a new sender. They are the
> > > Teleflex gauges. I've done research and have not found the same
> > > gauges/sending units. Also, would like to angle the gauges in their
> > > mounting so they are readable from the drivers seat. What have others
> > > done to remedy this?
> > >
> > > --
> > > Curt Sprenger
> > > 1987 PT38 8V92 "MacAttack Racing"
> > > Anaheim Hills, Calif.
> > >
> >
>
>