1992 PT40 Generator coolant hoses

[jim riordan]

Well, in my 88 WBWL it was a bear of a job. Where the hoses go through the
firewall/box at the back of the enclosure there were fiting that we had to
remove (damaged-corroded). we then were able to use MARINE grade hoses which we
got at our local marine supplier. we ran those as long as we could. This was a
time consuming and dirty job. Make sure you leave a long enough run in the
generator dog house so the gen can move in and out!

JIm RIordan
88 WBWL XXV
Stuart, Fl.

mbrund <mbrund@...> wrote:
I need to replace the coolant hoses on a 1992 PT40 with original
hoses. Looks like this might be a tough job. I looks like I can get
to the hoses at the back of the genset easily with the generator slide
in. But the hoses from the bulk head to the engine looks like they
may be a bear to get to. I have not been able to see the best way to
do those at the bulk head.

Has anyone done this job and can give me some insight?

Looks like I need about 27' of 1" ID hose, that should run me a few
bucks






---------------------------------
Need Mail bonding?
Go to the Yahoo! Mail Q&A for great tips from Yahoo! Answers users.

[Non-text portions of this message have been removed]