3208 with a single thermostat

[pattypape]

Many thanks to Mike for his great 3208 knowledge.

The engine in the 300hp, FC seems to set back about 4 inches to
accomodate the air to air cooler. This makes the space on the right
side really tight. I crowled into the doghouse and there were the
bolt/nuts behind the accessory plate. They were easy pickens with a
needle nose vise grip pliers. Mike said "two man job", so Patty
helped with that extra pair of hands.
There were two holes for the thermostats, But there was also a plate
another gasket and the SINGLE thermostat housing.

Thanks again to Mike he really knows these 3208's

Bill, who likes being in the Doghouse, 88 FC Michigan



--- In WanderlodgeForum@yahoogroups.com, "Mike Hohnstein"
<MHOHNSTEIN@w...> wrote:
> There are two thermostats, and two nuts behind the accessory plate
that need to be secured to remove the thermostat housing. There are
two gaskets that need to be renewed at the time the housing is R&Rd.
Do not use silicone sealer on these components. Make sure the
coolant PH is correct. The kits for checking are available from Napa
or any truck supply house. Make sure the engine is well grounded,
electrically speaking. That's important.
> Mike Hohnstein
> Germantown, WI
> 83FC35
> ----- Original Message -----
> From: pattypape
> To: WanderlodgeForum@yahoogroups.com
> Sent: Thursday, April 28, 2005 8:33 PM
> Subject: [WanderlodgeForum] 3208 with a single thermostat
>
>
> Hi All,
>
> Well, I worked on the hoses and cooling system today and visited
the
> local Cat dealer.
>
> I am having severe concerns and hesitation, about changing the
> Thermostat.
> The Cat shop had several exploded drawings and all were different
> than my 88FC.
> They were surprised to find a drawing of a single thermostat ,
They
> said " most all 3208's have two thermostats." I also talked to
an
> old time 3208 Cat mechanic, He thinks there is a nut in the rear,
> behind the back plate, he said "the cylinder head may need
> to be removed". Yikes!
>
> There are three bolts on the housing, the top right has a rear
nut,
> the lower right has a bolt that threads into the back plate.
The
> bolt on the left side of the housing seems to have a nut in the
> rear, It is impossible to reach with your fingers, wrench or
needle
> nose pliers.
>
> The single thermostat housing appears to bolt to a plate that
mounts
> to the dual thermostat fixture. The thermostat housing has a Cat
part
> number, but it is different than the part number on the Cat
exploded
> drawings.
> I have talked to Jack Bentley who has changed his 300 Hp 87FC
> thermostat and his description is also different.
>
> Has anyone changed a single thermostat on a 300HP Forward
Control ,
> 3208 turbo, with the air to air cooler.
>
> I now believe that all of these Birds are different.
>
> Any advice is appreciated,
>
> Bill 88 FC, with a clean flushed radiator and some new
hoses.
>
>
>
>
>
>
> --------------------------------------------------------------------
----------
> Yahoo! Groups Links
>
> a.. To visit your group on the web, go to:
> http://groups.yahoo.com/group/WanderlodgeForum/
>
> b.. To unsubscribe from this group, send an email to:
> WanderlodgeForum-unsubscribe@yahoogroups.com
>
> c.. Your use of Yahoo! Groups is subject to the Yahoo! Terms of
Service.
>
>
>
> [Non-text portions of this message have been removed]