sen solenoid & step solenoid

[Vaughn Paul]

Thank you for the reply. I have copies of the Vintage Bird posts, but
I am not certain the system is the same on the PT40.

I see that on my unit the gen door is hydraulic.

I will check it out closer



--- In WanderlodgeForum@yahoogroups.com, "pattypape"
wrote:
> I have been working on my air step also.
> There is a good write up on these parts posted on the Vintage
> Birds.com site. It seems that Grainger, & ARO, may have a valve.
> My original valve was made by ISI Fluid Power Inc. I think they
are
> out of business.
> The air cylinder is at Clippard.com Go to this site and find a
> distributor near your area. The air valve is a common item, Take
> your valve to the Clippard dealer. They can match it up to a
> replacement.
> I took mine valve apart, cleaned and lubricated it. I don't know
if
> this was a successful repair. I am waiting for a repair Kit for
the
> Clippard cylinder. It was leaking air at the shaft. Steps are still
> disassembled.
> Hope this helps,
>
> Bill 88FC Michigan
>
>
> -- In WanderlodgeForum@yahoogroups.com, "Vaughn Paul"
> wrote:
> > Hi.
> >
> > I am trying to source a couple of items.
> >
> > 1. The electric solenod that controls the air to the entry steps
> >
> > 2. The hydraulic solenod that controls the gen in/ot
> >
> > This is for a 1982 PT40. I have seen some of the old posts, about
> > Grainger etc. but I am trying to make certain that these apply to
> my
> > coach before I call BB parts.
> >
> > Thanks a bunch for any assistance.
> >
> > V. Paul
> > 1982 PT40