Aqua Magic Toilet

[Keith Strehle]

Thanks Ralph.....


--- In WanderlodgeForum@yahoogroups.com, "Ralph L. Fullenwider"
wrote:
>
> Keith:
>
> You will need a long blade screwdriver, a long 3/8 drive extension,
1/2
> socket and open end wrench.
>
> Turn off the water, press down the foot pedal and use the screw
driver to
> hold it in place, that should allow you to get to the front nut.
>
> with the seat up, there is a removable plug on the left side near
the rear,
> remove the plug, then useing the extension and socket you can
remove the
> rear nut. up inside there is the input water hose with a clamp,
remove the
> clamp and hose and that should allow you to pull the unit straight
up.
>
> Sounds like the vacuum breaker is leaking, I would replace both the
vacuum
> breaker and the inlet water valve, then re install.
>
> Safe travels,
>
> Ralph and Charolette Fullenwider
> 84FC35
> Ralph's RV Solutions, Duncan, Oklahoma
>
> At 04:06 PM 4/12/2007 +0000, you wrote:
> >Can anyone tell me how to get at the mounting bolts on an older
Aqua
> >Magic toilet? It's in very good condition but leaks from the back
when
> >flushing.
> >
> >Should I upgrade?
> >
> >Keith
> >84FC35
> >
> >
>