Microphor toilet and variable speed pump

[mbulriss]

--- In WanderlodgeForum@yahoogroups.com, "Stephen Birtles"
wrote:
>
> hey quit rubbing in about being warm
> Snow flurries here today yuck
> Stephen 77fc35

Sorry Stephen, but it was only 72 degrees here at 8am. My wife is
talking to her Mom in upstate NY who is reporting 6 inches of wet snow
right now, so you could be worse. There's a reason we don't live
there anymore.


Mike Bulriss - really leaving for the LSB rally now
1991 WB40 "Texas Minivan"
San Antonio, TX



>
>
> --- In WanderlodgeForum@yahoogroups.com, "mbulriss" <mbulriss@> wrote:
> >
> > > Pete Masterson
> > > '95 Blue Bird Wanderlodge WBDA 42
> > > Currently in Amarillo TX -- heading south out of winter's last
gasp...
> >
> > So Pete,.... are you going to join us in San Antonio at the Lone Star
> > Birds Rally this weekend? We are definitely south of Amarillo! And
> warm.
> >
> >
> > Mike Bulriss
> > 1991 WB40 "Texas Minivan"
> > San Antonio, TX
> >
> >
> >
> >
> >
> > --- In WanderlodgeForum@yahoogroups.com, Pete Masterson
> > wrote:
> > >
> > > My original post was about _water_ pressure. But the air pressure
> > > issue is also an excellent point. As it happens, I have a
Microphor
> > > 12v compressor that's independent from the coach air system. It's
> > > limited to 90 psi. I plan to move my dump valves over to the
> > > Microphor compressor when time allows as it will eliminate needing
> to
> > > 'air up' to dump.
> > >
> > > I notice that the air-dump valves seem to work ok with about 70
psi
> > > but are a little sluggish with less -- but I was in a very cold
> place
> > > when I was taking note of the pressures (I'd pumped up the coach
> with
> > > an external compressor since it wasn't worth the difficulty in
> > > starting the engine in 25 degree weather...)
> > >
> > > Pete Masterson
> > > '95 Blue Bird Wanderlodge WBDA 42
> > > Currently in Amarillo TX -- heading south out of winter's last
gasp...
> > > aeonix1@
> > >
> > >
> > >
> > > On Apr 12, 2007, at 11:29 AM, Richard Hayden wrote:
> > >
> > > > Along with air regulators for the Microphor we all should put
them
> > > > on the air line to the dump valves. According to Randy it would
> > > > extend the valves life by not pushing so hard when running with
> the
> > > > air pressure is over 100 lbs. Just another project I haven't
> > > > gotten around too yet.
> > > >
> > > > Dick Hayden - '87 PT 38 - Lake Stevens, WA
> > > >
> > > > ----- Original Message -----
> > > > From: Pete Masterson
> > > > To:
> > > > WanderlodgeForum@yahoogroups.com > > > > om>
> > > > Sent: Wednesday, April 11, 2007 7:37 PM
> > > > Subject: Re: [WanderlodgeForum] Microphor toilet and variable
> > > > speed pump
> > > >
> > > >
> > > > Yes, I have the air-operated Microphor (with a small 12v
> compressor
> > > > in the basement compartment nearby). It would be worthwhile to
> check
> > > > the Microphor website for the installation/troubleshooting
> manual
> > > > for
> > > > your model.
> > > <snip>
> > >
> >
>