Converting dual beds to queen?

[jvredden@...]

I have 91PT with twins in back and was considering not buying it because of
the beds. We put up a headboard across the rear, put 1/4" oak on the areas
around the bed, we built a span to cover the walkway between the beds, slid the
twins together, held them together with a queen fitted sheet ( tight as is
king size but snug fit holds it together well. I am very happy with it. We
also had a small bedside cabinet for each side of the bed. When it the twin
mode the fit together in the middle on the center table. It became real
convenient as when the son or daughter comes for a visit and brings a friend,
we
can separate the beds and there is room for all. Under my roadside bed is the
water tank. Under the curbside is the safe, water filter, water heater,
water pump,and a storage area. The way we feel now we have the best of both
worlds. The only negative is making the bed. We use a fitted sheet and pull
up
a quilt or comforter and all is wonderful.

We are happy with our set up and feel we lose nothing with our home done
conversion.

john redden
91PT40



************************************** See what's free at http://www.aol.com.


[Non-text portions of this message have been removed]