wheel bearing oil bath

[Ralph L. Fullenwider]

90 weight oil, fill to the full line.

Safe travels,

Ralph and Charolette Fullenwider
84FC35
Ralph's RV Solutions, Duncan, Oklahoma

At 03:14 AM 4/19/2007 +0000, you wrote:
>my bus has a broken shock on the front left and i have started to
>replace both of them. i have ordered the koni adjustable shocks and
>hope to get then in a few days. i have already removed both front tires
>and removed the old shocks. the shocks on the bird were monroe gas 65's
>and looked to be to small for that massive front end. it is my hope
>that the bus will ride a lot better with the new shocks. while i have
>the tires off i have also cleaned up the grease fittings and have lubed
>the front end. this leads up to my question tonight. the wheel bearings
>are in an oil bath and the oil level is low. can anyone tell me the
>proper oil to use in the bearing. thanks to all for the knowledge that
>you share with fellow birdies.
>
>ed and peggy mcstay
>83FCRB 35FT
>"lonesome dove"
>
>